Page 175 - Yamaha Marine Zubehör 2021

Yamalube

YAMALUBE WEATHER PROTECTION SPRAY
Suitable for: Rust and corrosion, caused by wetness and humidity, eat away at metal parts thus reducing its value and appeal. Not
many know there is a reliable and effective protection against it. Yamalube Weather Protection Spray protects and prevents metal
parts from corrosion.

FEATURES & BENEFITS
With regular use, reliably protects all metal parts of the vehicle against corrosion and stops existing
corrosion in its tracks

Forms a “self-healing”, transparent protective film that closes immediately again after being touched,
making it better than wax

Perfect for winter lay-up to protect against salt

Lubricates and displaces moisture

APPLICATION
Shake the can before use. Only apply the product to clean, dry surfaces

Spray on the product evenly and sparingly, or apply with a soaked cloth, and wipe
down with a soft cloth afterwards. For winter lay-up, spray on generously (without
wiping off)

Tip: The product can be easily removed with Yamalube Cleaning Gel

Note: Do not spray on hot surfaces! Do not spray on brake disks or tyre tread!

PACKAGING SIZE CONTAINER TYPE PACK LOT PART NUMBER
300 ML Aerosol can 6x YMD-65049-A0-51
YAMALUBE SILICON SPRAY
Black engine parts often suffer from dulling as a result of the harsh environment to which they are exposed and especially from the
effect of sun-bleaching. Yamalube Silicon Spray restores and refreshes sun-bleached parts while protecting plastics.

FEATURES & BENEFITS
Yamalube Silicon Spray serves to optically refurbish:

- Greyed and bleached metal motorcycle parts painted or unpainted (e.g. engine block, frame, fork,
engine side covers, rims, etc.)

- Rough and varnished plastic and rubber parts (e.g. side panels, inside panels, mudguards, fixtures,
carbon parts, top case, plastic case, blinkers, mirrors, etc.)

APPLICATION
Wash the vehicle thoroughly with Yamalube Cleaning Gel and then chamois it down

Shake the can well and spray on a thin, even coat from about 20 cm away. Then allow
to dry thoroughly

Wipe down any smooth plastic parts, such as linings, with an absorbent cloth after
application

Note: To protect surfaces that may not be treated (e.g. tyres, seat, speedometer
cover), only apply the product to rims, linings, fittings etc. with a soaked cloth. Do not
spray directly onto these parts!

PACKAGING SIZE CONTAINER TYPE PACK LOT PART NUMBER
300 ML Aerosol can 6x YMD-65049-A0-41

Dealer Rigging Guide – 173