Page 55 - Sicherheitsdatenblätter unser im Online Shop vertriebenen Produkte
P. 55
Outboard Gear Oil Page 3 of 5
SAFETY DATA SHEET
Date: 1 June 2005 Version: 2 Revision: 1
Information for safe handling Wear protective clothing as in Section 8. Do not weld, heat or
drill container. Replace cap or bung. Maintain minimum
feasible handling temperature. Water contamination should
be avoided. Caution: do not use pressure to empty drum, or
drum may rupture with explosive force. Emptied container
may still contain hazardous material, which may ignite with
explosive violence if heated sufficiently.
Storage Periods of exposure to high temperatures should be
minimized. Keep container closed when not in use.
8. Exposure controls/personal protection
Engineering measures No special ventilation is usually necessary. Good general
ventilation is recommended. However, if operating conditions
create high airborne concentrations, appropriate local exhaust
ventilation may be needed.
Personal protective equipment Chemical resistant gloves (eg nitrile) are recommended.
Wear chemical safety goggles or face shield if splashing
possible. Where more extensive contact may occur, wear
suitable protective clothing (eg apron, sleeves, boots).
Wear suitable respiratory protective equipment (breathing
mask) if exposure to vapour is likely. PPE should be to
European (EN) standards; consult manufacturers concerning
breakthrough times.
Occupational No component has a workplace exposure limit (UK), or a
exposure limits European indicative occupational exposure limit value.
9. Physical and chemical properties
Appearance Light brown liquid
Odour Slight
Pour point <-25 °C
Boiling range No data available
Flash point (typical) 238 °C (COC)
Explosive properties None identified
Autoignition temperature No data available
Vapour pressure No data available
Density 0.894 g/cm3 at 15 ºC
Solubility: in water Insoluble
Partition coefficient No data available
Viscosity No data available
10. Stability and reactivity
Outboard Gear Oil
Quick-FDS [17747-61470-06943-013456] - 2016-08-02 - 17:04:31