Page 169 - Yamaha Marine Zubehör 2021

Yamalube

YAMALUBE 2-M SUPER ENGINE OIL

High quality special formulation for 2-stroke marine engines. Developed, tested and approved by Yamaha.

FEATURES & BENEFITS
High quality anti-wear formula to protect against piston binding

Enhances the cleanliness of engine components - particularly
the piston and exhaust port - and prevents sludge formation

Outstanding anti-corrosion and anti-rust capability to provide
protection for the engine components

Lowers exhaust smoke by burning without leaving sticky
deposits

Reduces ring-sticking, spark plug fouling and pre-ignition

Withstands the high temperatures and pressures found in
modern engines - low aquatic toxicity

To give your customer the best possible advice, please see the
Yamalube application charts on pages 103-105.
SPECIFICATIONS
Colour Visual Dark Green
Density at 15°C (59°F) ASTM D1298 0.8714 g/cm3
Kinematic viscosity at 100°C (212°F) ASTM D445 6.807 mm2/s
Viscosity index ASTM D2270 145
Flash point ASTM D92 88°C
Pour point ASTM D97 -45°C
Total Base Number ASTM D2896 10.7 mg KOH/g

YAMALUBE STERNDRIVE DIESEL OIL
Special high-performance engine oil developed for gasoline and diesel-powered inboard engines. Developed, tested and approved by
Yamaha.

FEATURES & BENEFITS
Better cold flow characteristics make for easier engine starting

Excellent viscosity stability and reduced friction in all conditions

Exceptional anti-wear and anti-corrosion protection that
prolongs engine life

Good anti-oxidant action and detergency to protect the engine
parts and keep them clean

Strong dispersancy to keep particles in suspension and prevent
the build-up of damaging sludge

To give your customer the best possible advice, please see the SPECIFICATIONS
Yamalube application charts on pages 103-105. STANDARDS: Equivalent to API CF specifications
Viscosity Grade SAE 15W-40
Colour Visual Brown
Density at 15°C (59°F) ASTM D1298 0.887 g/cm3
Kinematic viscosity at 100°C (212°F) ASTM D445 14.7 mm2/s
Viscosity index ASTM D2270 135
Flash point ASTM D92 240°C
Pour point ASTM D97 -32.5°C
Total Base Number ASTM D2896 11.0 mg KOH/g
Foam sequence II ASTM D892 20/0 ml max.
Sulphated ash ASTM D874 1.6 mass %

Dealer Rigging Guide – 167